Projekte

Technische Daten

ModelWRT54GL
Ports * 1x WAN 10/100 RJ-45 \ * 4x LAN 10/100 RJ-45

Firmware flashen

TFTP

PPPoE

root@OpenWrt:/etc/ppp# nvram set ppp_username="<ANSCHLUSSKENNUNG><T-ONLINE-NR>#0001@t-online.de"
root@OpenWrt:/etc/ppp# nvram set ppp_passwd="<PASSWORT>"
root@OpenWrt:/etc/ppp# nvram get wan_device vlan1
root@OpenWrt:/etc/ppp# nvram set pppoe_ifname=vlan1
root@OpenWrt:/etc/ppp# nvram set ppp_mtu=1492
root@OpenWrt:/etc/ppp# nvram set wan_proto=pppoe
root@OpenWrt:/etc/ppp# nvram commit
root@OpenWrt:/etc/ppp# nvram get ppp_redialperiod 30
root@OpenWrt:/etc/ppp# nvram get ppp_demand 1

Verbindung zum Internet

/sbin/ifup.pppoe wan
ping 194.25.2.129”
syslogd -L -O /var/log/messages

Brick

Wenn der Router nicht mehr will

  1. Strom Abziehen
  2. Strom einstecken
  3. Wenn DMZ LED blinkt sofort ganz oft auf easy config Taste (Cisco Symbol)vorne am Gerät drücken
 telnet 192.168.1.1
 mount_root
 passwd root
 mtd -r erase rootfs_data
 nvram set boot_wait=on
 nvram set boot_time=10
 nvram commit && reboot
 ifconfig br-lan add 192.168.1.88
 route add default gw 192.168.1.1
 echo "nameserver 194.25.2.129" > /etc/resolv.conf

Sonstiges

DynDNS

Package installieren

opkg install ez-ipupdate

Startup script anpassen

vi /etc/init.d/custom-user-startup
/usr/sbin/ez-ipupdate -d -S dyndns -i <interface> -h <dyndnsname> -u <username>:<passwort> &

linksys_router.txt · Last modified: 2012/01/25 21:34 by petersommer
 
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki